Hello! I just found this post doing research on icamera. There should be a rubber button on back of cam. This button has 2 functions. 1st is factory reset. Hold button for 10 seconds. then it will be reset. 2nd function is hold button for 3 seconds, green light on front left blinks to learn wifi and press wps button on router. It is supposed to learn your wifi creds and connect wirelessly but it didn't work for me. I wired it direct to router and had to use Poe dongle. Power on cam and in a few seconds scan your network for any changes. Your cam should be listed. in browser type in that ip and it should get you to cam admin page. My default login was administrator and pass was blank. Hope this helps.