To start off with I have to cams ( iCamera-1000-ADT Camera and OC810-ADT Outdoor/Night Camera)

This blog has helped a lot in helping me figure out a lot. I found that I can connect to my wireless via WPS set up for my cams without the need for getting into the setting.

Your question: I use the CGI to configure the settings for this to parameters are GET ( view) and SET ( Change), so for instance

/adm/get_group.cgi?group=EMAIL ( will display all the settings for email)
/set_group.cgi?group=EMAIL&smtp_enable=1 (will change the settings for the parameter smpt_enable to 1)

With the iCamera-1000-ADT Camera, I am having zero luck getting past the admin password , any help will be appreciated.